Site icon Premium Researchers

DESIGN AND CONSTRUCTION OF DIGITAL INCUBATOR

Do You Have New or Fresh Topic? Send Us Your Topic

DESIGN AND CONSTRUCTION OF DIGITAL INCUBATOR

 

PREFACE

The purpose of this text is to present at a primary and intermediate level a comprehensive over view of the construction principle and indeed the operation of a Digital Incubator.  We want to present a situation where by as the temperature in going up let the resistance be decreasing and as the temperature decreases let the resistance be going up.

The history and importance of Electronics as a unique branch of science cannot be over emphasized Electronic as its history might have it, is divided into two periods.  The first began with the invention of the vacuum tube, the second, occupying the later half of the twentieth century in based on the invention of the transistor.

Since Electronic is the branch of science and Technology relating to the conduction and control of electricity flowing through semi-conductor materials through vacuum are based.  Its application to industry will be concerned with the design, manufacture and application of transistors, dides, integrated circuits and other semi-conductor devices and to a much lesser extent vacuum tubes.

Therefore, it is a fact crystal clear, that it is from the above breed and follow up from the electronic industry that such devices like Digital incubator was able to be made, Digital incubator is therefore device designed to keep chicken and babies at a required temperature when they are delivered prematurely especially as it applies to babies.  It is used to keep them worm.

It is commendable to note here that with the help of this digital work on construction and operation of digital incubator, students of electronic engineering now have a text to lay hands on.

TABLE OF CONTENTS

Title page

Approval page

Dedication

Acknowledgement

Table of contents

Preface

CHAPTER ONE

INTRODUCTION

CHAPTER TWO

PROJECT REVIEW

CHAPTER THREE

COMPONENT DESCRIPTION

3.0 INTRODUCTION

3.1 TRANSFORMER

3.1.1 STEP- DOWN TRANSFORMER

3.1.2 Step-up transformer

3.1.3 Transformer Ratings

3.2 RESISTOR

3.3 CAPACITOR

3.4 DIODE

3.5 RECTIFIER

3.6 TRANSISTOR

3.7 RELAY

3.9 LIGHT EMITTING DIODE (LED)

CHAPTER FOUR

THE PRINCIPLE OF OPERATION OF A DIGITAL INCUBATOR.

4.1 VERO BOARD:

4.2 HEATING ELEMENT (BULB)

4.3 FAN

4.4 CABLES

CHAPTER FIVE

PACKAGING AND DESIGN

4.6 MOUNTING PROCEDURE

CHAPTER SIX

CONSTRUCTION AND TESTING

6.1 TESTING THE CIRCUIT

CHAPTER SEVEN

CONCLUSION

PROJECT COST

 

Do You Have New or Fresh Topic? Send Us Your Topic 

 

DESIGN AND CONSTRUCTION OF DIGITAL INCUBATOR

Not What You Were Looking For? Send Us Your Topic

INSTRUCTIONS AFTER PAYMENT

After making payment, kindly send the following:

» Send the above details to our email; contact@premiumresearchers.com or to our support phone number; (+234) 0813 2546 417 . As soon as details are sent and payment is confirmed, your project will be delivered to you within minutes.