Project Materials

RESEARCH WORKS AND MATERIALS

DESIGN & CONSTRUCTION OF AN AC-DC POWER SUPPLY TRAINER



Do You Have New or Fresh Topic? Send Us Your Topic


DESIGN & CONSTRUCTION OF AN AC-DC POWER SUPPLY TRAINER

 

 

CHAPTER ONE

INTRODUCTION

BACKGROUND STUDY

Although certain electrical appliances operate with an unregulated AC, almost all basic household and laboratory electronic circuits need an unregulated AC to be converted to constant DC, in other to operate the electronic device. The AC supply from the mains is usually rectified to a DC, and the DC supply is regulated and limited in terms of voltage and current.

But the supply provided from the mains may be fluctuating and could easily break down the electronic equipment if not properly limited. This work of converting an unregulated alternating current or voltage to a limited direct current or voltage to make output constant regardless of the fluctuations in inputs is achieved by regulated power supply trainer circuit.

Power supply trainer circuit board’s fundamental base is providing both unregulated AC power for AC operated devices and a regulated DC for operation of basic electronic devices as well as provide circuitry components for carrying out of certain electrical test, experiments and training in the laboratory.

APPLICATION
Some applications of power supply trainer are:
Supply of electric power for operation of laboratory appliances using AC;
Achieving supply of electrical power ranging from 0V to 12V;
For testing of components, which makes it easy to design prototypes and experiment with circuit designs.

AIM
The aim of this projects is to design and construct an AC-DC power Supply Trainer Board.

OBJECTIVES
To design and construct a trainer board which receives electrical AC power from the mains.
To design and construct a circuit with a set of diodes that rectifies the ac to a dc.
To design and construct a circuit that regulates the rectified dc voltage and varies the out with voltages ranging from 0V to 12V.
To mount several electrical components such as meters, plug sockets, active and passive components like resistors, capacitors and inductors.

LIMITATION
Though the power supply trainer can be used for operating of several dc devices, it can only be used for laboratory purposes and is therefore for internal use only.

SOURCE OF MATERIAL
The materials and components for this project are affordable and readily available in electronics stores.

 

Do You Have New or Fresh Topic? Send Us Your Topic 

 

DESIGN AND CONSTRUCTION OF AN AC-DC POWER SUPPLY TRAINER BOARD


Not What You Were Looking For? Send Us Your Topic



INSTRUCTIONS AFTER PAYMENT

After making payment, kindly send the following:
  • 1.Your Full name
  • 2. Your Active Email Address
  • 3. Your Phone Number
  • 4. Amount Paid
  • 5. Project Topic
  • 6. Location you made payment from

» Send the above details to our email; [email protected] or to our support phone number; (+234) 0813 2546 417 . As soon as details are sent and payment is confirmed, your project will be delivered to you within minutes.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Advertisements